Contact us today!
Let us help you find the right solution.
In the media
Excel HV9 and HV10 balers
These single-ram, automatic closed-end balers feature the revolutionary single-sheet, interlocking construction found in Excel’s two-ram balers. The floor and side sheets are single sheets that are cut to fit together.
The HV9 and HV10 machines feature an interlocking chassis design. The sidewall of the chassis is tabbed into slots in the floor of the baler, making it the strongest chassis in the industry. Excel uses a rotator jig during the welding process that spins the entire chassis 360 degrees, allowing the welding to be done “in position” so there are no weld seams. This results in the strongest triple-pass welds possible - Excel chassis sidewalls don’t bow, crack or bend.
- Materials baled: office paper, newspaper, OCC, magazines, PET, HDPE, aluminum cans, tin cans, painted aluminum siding, aluminum extrusions, insulated wire, radiators, copper and other materials.
Specifications
Excel HV10 |
Excel HV9 |
||
Hydraulics |
Total force |
235,619 lbs/255,254 lbs maximum (106.874/115.781metric tons) |
190,851 lbs/206,756 lbs maximum (86.5685/93.7829 metric tons) |
Ram face pressure |
145/157 PSI maximum (10/10.8 bar) |
117/127 PSI maximum (8/8.75 bar) |
|
System Pressure |
3,000 PSI automatic mode/3,250 PSI maximum (206/224 bar) |
3,000 PSI automatic mode/3,250 PSI maximum (206/224 bar) |
|
Oil Reservoir |
300 gallons (1,136 litres) |
300 gallons (1,136 litres) |
|
Main Cylinders |
10” bore by 100” stroke (25.4 cm by 254 cm)7” chrome rod (18 cm) |
9” bore by 100” stroke (23 cm by 254 cm)6” chrome rod (15 cm) |
|
Electrical |
Motor |
50 HP (37 kW) TEFC 460 V or 575 V 3 phase (200 V optional) |
50 HP (37 kW) TEFC 460 V or 575 V 3 phase (200 V optional) |
Pump |
100 GPM (376 LPM) |
100 GPM (376 LPM) |
|
Structure |
Height |
7’ (2.13 m) |
7’ (2.13 m) |
Width |
7’ 4” (2.24 m) |
7’ 4” (2.24 m) |
|
Length |
21’ 2” (6.45 m) |
21’ 2” (6.45 m) |
|
Feed Opening |
55” W by 45” L (1.4 m W by 1.14 m L) |
55” W by 45” L (1.4 m W by 1.14 m L) |
|
Shipping Weight |
40,000 lbs (18,143 kg) |
38,000 lbs (17,236 kg) |
|
Chamber Floor |
1” plate |
1” plate |
|
Chamber Side Walls |
¾” plate |
¾” plate |
|
Performance |
Estimated Bale Size (Adjustable) |
60” L by 45” W by 30” H (152 cm L by 114 cm W by 76 cm H) |
60” L by 45” W by 30” H (152 cm L by 114 cm W by 76 cm H) |
Cycle Time |
17 seconds (13 seconds short stroke) |
15 seconds (11 seconds short stroke) |
|
Estimated Bale Weights |
OCC |
1,500 lbs (680 kg) |
1,400 lbs (635 kg) |
Newspaper |
1,700 lbs (771 kg) |
1,600 lbs (726 kg) |
|
Magazines |
2,400 lbs (1,087 kg) |
2,300 lbs (1,043 kg) |
|
Office Paper |
1,700 lbs (771 g) |
1,600 lbs (726 g) |
|
HDPE Plastics |
1,250 lbs (566 kg) |
1,250 lbs (566 kg) |
|
PET Plastics |
950 lbs (431 kg) |
850 lbs (386 kg) |
|
Aluminum Cans |
900 lbs (408 kg) |
750 lbs (340 kg) |
|
Tin Cans |
1,800 lbs (816 kg) |
1,600 lbs (726 kg) |
|
Aluminum Extrusions |
1,200 lbs (554 kg) |
1,000 lbs (409 kg) |
|
Painted Aluminum Siding |
2,000 lbs (907 kg) |
1,700 lbs (771 kg) |
|
Radiators |
1,700 lbs (771 kg) |
1,500 lbs (680 kg) |
|
Insulated Copper Wire |
3,500 lbs (1,587 kg) |
3,300 lbs (1,497 kg) |
|
Miscellaneous Non-Ferrous Scrap |
1,500 lbs (680 kg) |
1,300 lbs (590 kg) |
|
Estimated Tons Per Hour |
OCC |
4.1 tons per hour |
3.8 tons per hour |
Newspaper |
8.4 tons per hour |
8 tons per hour |
|
Magazines |
10 tons per hour |
9.5 tons per hour |
|
Office Paper |
8.4 tons per hour |
8 tons per hour |
|
HDPE Plastics |
3.4 tons per hour |
3.1 tons per hour |
|
Aluminum Cans |
2.7 tons per hour |
2.5 tons per hour |
|
Tin Cans |
5.1 tons per hour |
4.8 tons per hour |
|
Aluminum Extrusions |
2.7 tons per hour |
2.5 tons per hour |
|
Painted Aluminum Siding |
4.5 tons per hour |
4.25 tons per hour |
|
Radiators |
4.7 tons per hour |
4.5 tons per hour |
|
Insulated Copper Wire |
10.5 tons per hour |
10 tons per hour |
|
Miscellaneous Non-Ferrous Scrap |
5.1 tons per hour |
4.8 tons per hour |
